To Next PageTo Next Page
Need help?Do you have a question about the Digitrax DCS210+ and is the answer not in the manual?
Step-by-step process for selecting a locomotive by its address.
How to adjust the speed step settings for a locomotive decoder.
Guide to operating multiple locomotives as a single unit (consist).
Detailed steps for adding a locomotive to an existing MU or consist.
How to control individual functions of locomotives within an MU.
How to operate functions F0 through F9 using the throttle keypad.
Details on operating Function 0 for headlights and reverse lights.
Common issues and solutions for locomotive function operation problems.
Introduction to programming locomotive decoders using the command station.
General information on reading and writing decoder CVs, including errors and notes.
General| Model | DCS210+ |
|---|---|
| DCC Protocol | DCC |
| Throttle Network | LocoNet |
| Manufacturer | Digitrax |
| Type | Command Station |
| Track Power Output | 5 Amps |
| Computer Interface | USB |
| Compatibility | Compatible with LocoNet |
