© 2020 Digitrax, Inc. www.digitrax.com
2
1.0 Introduction .....................................................................................3
2.0 Quick Start Guide .........................................................................5
2.1 UT6 LCD screen ............................................................................6
2.1.1 Home Operations Screen .........................................................6
2.1.2 Screen IDLE Power saver ..........................................................7
3.0 Operating on batteries without LocoNet cable ................8
3.1 Recharging a Digitrax BP600MH Battery pack ..................... 8
3.2 Powering a UT6 OFF .....................................................................8
4.0 How to select Locomotives and run trains ....................... 9
4.1 How to select a Locomotive address ....................................9
4.2 Selecting an Analog or non-decoder locomotive ............ 10
4.3 Additional address menus ..................................................... 10
4.3.1 Select a prior address using RECALL soft key ................... 10
4.4 Releasing an address from a throttle .................................. 10
4.5 How to Dispatch Locomotives ............................................... 11
4.6 How to Steal Locomotives, forcing selection ..................11
4.7 Status Edit: changing speed step settings ......................12
4.8 Multiple Unit [MU] or Consist operations .........................12
4.9 Adding a Locomotive to an MU .........................................13
4.10 Removing a Locomotive from an MU ................................ 14
4.11 MU of mismatched locomotives ......................................14
4.12 Controlling functions on MU’ed locomotives ................14
5.0 Locomotive Functions ............................................................. 15
5.1 Controlling Functions F0-F9 .............................................15
5.1.1 Function 0 (F0) Headlights Forward and Reverse ...............15
5.1.2 Functions 1,3, 4, 5, 6, 7, 8 & 9 ............................................... 15
5.1.3 Function 2 (F2) Momentary Operation ................................. 16
5.2 Functions 10 through 19 ....................................................16
5.2.1 Quick access to Functions 10 through 19 ........................... 16
5.3 Functions 20 to 28 ..................................................................... 16
5.4 Troubleshooting Function Operation ................................16
6.0 Switch/Turnout control mode ..........................................16
7.0 Expanded Menu Features ...................................................... 17
7.1 Utility tasks for setup: ........................................................17
7.1.1 Fast clock editor ..................................................................... 17
7.1.2 UT6 Options Editor ................................................................. 18
7.1.3 Duplex RF Scan (UT6D) ......................................................... 18
7.1.4 Duplex settings Editor .................................................................19
8.0 Emergency Stop ......................................................................... 19
9.0 FCC/Regulatory Information ................................................. 20
10.0 Warranty and Repair Information ..................................... 21
To Next Page
Loading...
Need help?
General