22
NOTE: You can apply this function to a server under different
network segment. HOWEVER, some router/switch hub does not
allow communication between servers under different segment. In
this case, you won’t even see the server on a different network
segment.
Connect Automatically By Port: This is a new function that, when
enabled, any USB device plugged into the enabled port will be
connected automatically. Please see Featured Functions chapter for a
detailed description of this function.
Backup Firmware: this function is a fail-save mechanism for the Update
Firmware function. Just browse to where you want to save the backup
file and click on Save to save the file.
Update Firmware: update firmware with this function. Use the Browse
button to choose the firmware to update. Click on Open to start.
Change Password: Simply enter the new password and enter it again
for confirmation. Click on Submit to change.
Restart Server
This button reboots the server. Please note that this function will not
work if the server you attempt to reset has a device connected to it and
the device is occupied by a user.
To Next Page
Loading...
