USB 3.0 to VGA adapter
Manual
DA-70840 Rev. 2
Description
DIGITUS USB 3.0 to VGA Adapter, resolution up to 1920x1080 @60Hz, extend and
mirror mode support
The DIGITUS USB 3.0 to VGA Adapter extends your workspace with an additional
monitor, TV or projector via the USB interface. You can use two graphic adapters
simultaneously on the PC and add or remove a monitor without rebooting the system.
This adapter supports resolutions up to 1920x1080, video streaming up to 1080p. The
USB 3.0 to VGA adapter impresses with its elegant black housing and without
additional installation of graphics cards. The power supply runs through an USB port,
so there’s no additional external power supply needed.
Feature
Compliant with USB3.0 Specification Revision 1.0
Compliant with Universal Serial Bus Device Class Definition for Audio/Video
Devices (USB A/V)
USB upstream port supporting SS/HS data rate (5Gbps/480Mbps)
Video output up to 1920x1080@60Hz in USB 3.0 application (Video output
800x600 in USB 2.0 application)
Supports USB Plug and Play (PNP)
WHCK/WHQL certified driver support for Windows 7, 8 and 10
Support Windows Aero Effects
To Next Page
Need help?
General
