USB 3.0 to HDMI/VGA Adapter
Manual
DA-70843
Description
DIGITUS USB 3.0 to VGA/HDMI Adapter, resolution up to 1920x1080 @60Hz, extend
and mirror mode support
The DIGITUS USB 3.0 to VGA/HDMI Adapter extends your workspace with up to two
additional monitor, TV or projector via the USB interface. You can add or remove a
monitor without rebooting the system. This adapter supports resolutions up to
1920x1080, video streaming up to 1080p. The USB 3.0 to VGA/HDMI adapter
impresses with its elegant black housing and without additional installation of
graphics cards. The power supply runs through an USB port, so there’s no additional
external power supply needed.
Feature
Compliant with USB3.0 Specification Revision 1.0
Compliant with Universal Serial Bus Device Class Definition for Audio/Video
Devices (USB A/V)
USB upstream port supporting SS/HS data rate (5Gbps/480Mbps)
Video output up to 1920x1080@60Hz in USB 3.0 application (Video output
800x600 in USB 2.0 application)
Supports USB Plug and Play (PNP)
WHCK/WHQL certified driver support for Windows 7, 8 and 10
To Next Page
Need help?
General
