Need help?Do you have a question about the Digitus DA-70156 and is the answer not in the manual?
General| Product Name | Digitus DA-70156 |
|---|---|
| Category | Adapter |
| Connector 1 | USB Type-A |
| Connector 2 | RJ45 |
| Chipset | AX88772A |
| USB Standard | USB 3.0 |
| Colour | Black |
| Data transfer rate | 10/100/1000 Mbps |
| Model | DA-70156 |
| Interface | USB |
| Operating System Compatibility | Windows, macOS, Linux |
| Connector gender | Male |
| Ethernet Standard | IEEE 802.3, IEEE 802.3u |
| Connector | RJ45 |
| LED Indicators | Link, Activity |
| Operating Temperature | 0°C to 70°C |
| Humidity | 10% to 90% RH |
| USB version | USB 3.0 |
Connect device, start wizard, select no update, choose advanced search, and search removable media.
Auto-search for driver, select match, and wait for installation to complete.
Finish wizard, detect new COM port, and verify device in Device Manager.
Adjust VCP settings, reconnect device to ensure proper COM port assignment.
Use FTClean.exe to remove drivers, disconnect device, and confirm uninstallation.
Overview of Mac OS X driver installation and availability from FTDI website.
Download, run the .dmg installer, reboot, and configure network port.
Remove drivers from Mac OS X using Terminal commands and System Preferences.
Use System Profiler to identify Vendor and Product IDs for the connected device.
Purpose of the manual for Windows CE devices and drivers.
Copy VCP driver files to PDA and enter driver name during device installation.
To Next Page
