2. Make sure the SATA connector fits into the hard drive well
3. Slide the hard disk in and fix the tray by screws in real
4. Connect the enclosure with computer by USB cable
5. When attached to PC or device, click 'My Computer' and hard drive will appear
6. No additional drivers required
Operation System
Windows 2000/XP/VISTA/WIN7/8/10, iOS, MAC OS X
No driver program is necessary. Connect the USB cable to PC. Click “My computer” and hard-disc
will appear. An icon for online plug should appear on the lower right corner of the status bar (new
hard-disc should be divided into sections with F DISK first, then its icon will appear and normal
operation can start after formatting.)
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of con-
formity can be requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In
this case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
