17
“M” again and the display shows
“Un”.
Press or to switch to “br”.
Press “M” to select. Press or to
switch between
Low (L), Normal (n) or High (H)
brightness. Press “M” to save your
Collision Force Detection (CF)
Press and hold the “M” button,
until the “S--”shows and flashes.
Press “M” again and the display
shows “Un”. Press or to witch
to “br”. Press “M” to select. Press
or to switch between
“OFF”, Low (L), Normal (n) or
Heavy (H) collision force
detection. Press “M“ to save your
the LED display will show ‘RES’
and the desk goes down to the
lowest level and comes back to
certain height to finish Reset
9. Important Safety & Usage Instructions
1. This appliance can be used by children aged from 8 years and above and
persons with reduced physic, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved
2. Persons with reduced physical, mental abilities and or lack of experience
and knowledge must not use the product, unless they're under
supervision, understand the hazards involved or they have been
thoroughly instructed in the use of the apparatus by a person who is
responsible for the safety of these persons
To Next Page
Loading...
