3
auto-negotiation and KR startup, and IEEE802.3ad, IEEE802.1ax,
IEEE802.1Q, IEEE802.1P, IEEE802.1Qaz, IEEE802.1Qbb,
IEEE802.1Qbg, IEEE1588V2.
The DN-10180 also supports jumbo frame support up to 9.6KB,
independent NC-SI SMBus interface, independent stand-by and
wake-on-Lan signals, hardware-based reliable transport, collective
operation offloads, and PeerDirect RDMA (aka GPUDirect
communication acceleration).
Other key features of the DN-10180 include 64/66 encoding,
extended reliable connected transport, dynamically connected
transport, RDMA over Converged Ethernet (RoCE), TCP/UDP/IP
stateless offload, LSO.LRO. checksum offload, and hardware offload
of encapsulation and decapsulation of NVGRE and VXLAN overlay
networks.
This network interface card also supports SR-IOV, Multi-function,
Enhanced QoS, VMware support, and up to 256 virtual functions and
8 physical functions per port. It offers guaranteed QoS for VMs and is
compatible with OpenMPI, IBM PE, OSU MPI, and Intel MPI
protocols.
The DN-10180 is designed to support remote boot over Ethernet,
iSCSI, PXE, and UEFI and is compatible with a wide range of operating
systems, including FreeBSD, Linux 5.x and above, VMware
5.5/6.0/6.5/6.7, Windows Server 2008/2012/2016/2019, and
Win7/Win8/Win8.1/Win10 32 or 64bit.
Overall, the DN-10180 is a high-performance network interface card
that offers reliable and efficient network connectivity for your server
or workstation. It is designed to meet the demands of modern data
centers and is compatible with a wide range of devices and operating
systems.
To Next Page
Loading...
Need help?
General
