5
• SR-IOV, Multi-function, Enhanced QoS, VMware support
• SR-IOV up to 256 virtual functions
• SR-IOV up to 8 physical functions per port
• Guaranteed QoS for VMs
• OpenMPI, IBM PE, OSU MPI, Intel MPI protocol support
• NC-SI over MCTP over SMBus and NC-SI over MCTP over
PCIe-Baseboard Management Controller interface
• Remote boot over Ethernet, iSCSI, PXE, and UEFI
• Supports Operation Systems: FreeBSD, Linux5.x and above,
VMware5.5/6.0/6.5/6.7, Windows server2008/2012/2016/2019,
win7/win8/win8.1/win10 32 or 64bit.
4. System Requirements
• FreeBSD, Linux, VMWare ESXi
• Win-server2008 R2/ Win-server2012 R2/ Win-server2016/
Win-server2019
• Windows: 8/8.1/10 32/64bit
• One available PCI Express x8/x16 slot
5. Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe x4/x8/X16 slot.
4. To install the card, carefully align the card’s bus connector with
the selected PCIe slot on the motherboard. Push the board down
firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
To Next Page
Loading...
Need help?
General
