4
2. Find the wireless print server by Windows Zero Configuration or vendor utility of
wireless adapter. Then click Connect.
Or
You can use WPS function to quickly set up a wireless network with strong security, without
having to configure security settings manually.
1. Press WPS buttons in each of the device itself and Wireless AP in three seconds and
release it, then the WLAN LED of device will be off.
2. Wait two minutes to find another device that also has WPS activated. Then, the two
devices connect and set up a secure network by themselves.
Software Installation:
1. To enable network communication with print server, your computer must have a proper
IP address, e.g. 192.168.0.101 (the print server’s default IP is 192.168.0.10)
2. Insert the setup CD into your CD-drive. The autorun program will be started.
To Next Page
Loading...
