Need help?Do you have a question about the Digitus DN-13003-1 and is the answer not in the manual?
General| Brand | Digitus |
|---|---|
| Model | DN-13003-1 |
| Category | Print Server |
| Language | English |
Describes the print server's function, capabilities, and included components for network printing.
Details SNMP support for remote management and network configuration via embedded web server or PSAdmin utility.
Explains the function of LED indicators and provides step-by-step instructions for hardware setup.
Provides dimensions for wall mounting and illustrates a typical wired network setup with the print server.
Outlines prerequisites and lists supported network operating systems and protocols for installation.
Presents a table detailing various methods and solutions for print server configuration.
Step-by-step guide for installing the necessary software components from the setup CD.
Instructions on how to use the PSAdmin utility for managing the print server.
Details on using the TCP/IP and NetWare configuration wizards for setup.
Procedure for manual configuration and detailed TCP/IP settings adjustment.
Instructions for upgrading print server firmware and performing device resets.
Procedure for removing the PSAdmin software from a Windows PC.
Explains the Internet Printing Protocol and its use for network printing.
Guide for setting up Internet Printing Protocol on Windows 2000, XP, and 2003 systems.
Details system requirements and installation steps for HP Web JetAdmin software.
Procedures for verifying HP Web JetAdmin installation and uninstalling the utility.
Steps to access and use the print server's embedded web interface for configuration.
Details on viewing system information, print jobs, and printer status via the web interface.
Information on viewing status for TCP/IP, NetWare, and AppleTalk network configurations.
Details on viewing and configuring SNMP and SMB status for network printing.
Guides for general system setup, password management, and TCP/IP network settings.
Steps to prepare for installation and select the desired network protocol.
Detailed steps for installing the TCP/IP protocol on Windows.
Manual installation steps for Windows 95/98/Me/NT/2000/XP/2003 systems.
Procedure for removing the Network Print Port components from Windows systems.
Basic overview and methods for assigning an IP address to the print server.
Steps for installing TCP/IP LPR port printing on Windows NT.
Guide for installing Standard TCP/IP port printing on Windows 2000/XP/Vista/7.
Instructions for installing the print server on various UNIX and Linux systems.
General information and prerequisites for upgrading the print server's firmware.
Procedures for upgrading firmware using the PSAdmin utility or Windows TCP/IP.
Steps for upgrading the print server firmware on UNIX systems using TCP/IP.
Instructions for upgrading the print server firmware through its web interface.
Diagnosing issues using LED lights and troubleshooting power-related problems.
Specific troubleshooting steps for Windows 2000, XP, Vista, and 7 environments.
Guidance for resolving common TCP/IP network connectivity and configuration issues.
Instructions for enabling and using SMB printing with Windows XP.
Procedures for rebooting, factory resetting, and printing self-test pages.
Explains why print jobs might fail to reach the printer after queue success.
Addresses issues of slow printing or incorrect characters due to driver problems.
Troubleshooting common errors during firmware upgrades and PSAdmin setup.
Solution for the setup wizard failing to detect the print server, often due to firewall.
Specific instructions for installing Panasonic KX-P6100/6300/6500 printers.
To Next Page
