EasyManuals Logo

Digitus DN-13003-1 User Manual

Digitus DN-13003-1
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
76
Reset Button
Reboot the Print server:
1. Verify the power of print server is turned on.
2. Press the reset button once, and then release it.
WARNING: This will restart the print server and stop all on-going and pending print
jobs!
Perform a Factory Default:
1. Disconnect the external power adapter.
2. Hold down the reset button.
3. Reconnect the external reset button. Wait about 5~6 seconds.
4. Release the reset button.
5. The print server will restart.
WARNING: This will erase all settings of print server to default and should be
performed with caution!
Print Self-test Page:
1. Verify the power of print server is turned on.
2. Press the reset button for 5 seconds, and then release it.
3. Then the self-test page including the factory default settings will be printed.
Note:
1. It is strongly recommended to use Laser Printer for self-test page printing.
2. Some printers are not supposed to print the self-test page completely. For example, the
HP deskjet 948c/895CXi will print the self-test page, but its paper-out LED will light up.

Table of Contents

Other manuals for Digitus DN-13003-1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digitus DN-13003-1 and is the answer not in the manual?

Digitus DN-13003-1 Specifications

General IconGeneral
BrandDigitus
ModelDN-13003-1
CategoryPrint Server
LanguageEnglish

Related product manuals