System Setup
1.Click Setup, it then appears the sub-menu.
2.Click System, it then as shown in the following picture.
Email Alert:
This option allows you to Enable/Disable the Email Alert support.
SMTP Server IP Address:
This option allows you to input the IP address of your Email SMTP server.
Administrator E-mail Address:
This option allows you to input your Email address that you want to receive the
notification by Email.
Print Server Name:
This option allows you to input device name of the print server. To correct the
print server’s device name.
System Contact:
This option allows you to input contact name of the print server. To check the
print server’s contact name who in charge of this device.
System Location:
This option allows you to input Location name of the print server. To confirm the
print server’s location name where the print server is located in the office’s
LAN.
To Next Page
Loading...
Need help?
General
