Printer Type:
This option allows you to view printer type from the print server. If you are using
a PostScript printer you can select the LaserWriter 8 icon from your Mac
computer.
Data Format:
This option allows you to view data format from the print server. If you are using
a PostScript printer you can select ASCII, TBCP or BCP format from web
configuration.
SNMP Status
1.Click Status, it then appears the sub-menu.
2.Click SNMP, it then as shown in the following picture.
SNMP Communities:
This option allows you to view SNMP communities from the print server. There
are two communities that control message from the network management of
the print server.
SNMP Traps:
This option allows you to view SNMP traps from the print server.
To Next Page
Loading...
Need help?
General
