3
Factory Default Settings:
Password:
Wireless Mode: Ad-Hoc (Peer-to-Peer)
Channel: 6
SSID: WLAN-PS
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
Hardware Installation:
1. Turn off the printer’s power.
2. Connect the print server to your printer with the supplied printer cable.
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).
Prepare Your Computer to Connect Wireless Print Server first
(Wireless Ad-Hoc Mode):
1. Please specify a proper IP address for your wireless adapter, e.g.192.168.0.101.
To Next Page
Loading...
