14
04: ECO enable/disable
Interface Setting
ENA: ECO mode enable
DIS: ECO mode disable(Default)
05: AECO enable/disable
Interface Setting
ENA: Advanced ECO mode enable
DIS: Advanced ECO mode disable(Default)
06: Bypass mode enable/disable when UPS is off
Interface Setting
ENA: Bypass mode is enabled when UPS is off
DIS: Bypass mode is disabled when UPS is off (Default)
07: Programmable outlets enable/disable
Interface Setting
ENA: Programmable outlets enable
DIS: Programmable outlets disable(Default)
08: Programmable outlets setting
Interface Setting
0-999: setting the backup time limits in minutes from 0-999
for programmable outlets which connect to non-critical
devices on battery mode.
To Next Page
Loading...
