EasyManua.ls Logo

Digitus DN-7018 User Manual

Digitus DN-7018
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WIRELESS LAN ACCESS POINT
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Digitus DN-7018 and is the answer not in the manual?

Digitus DN-7018 Specifications

General IconGeneral
BrandDigitus
ModelDN-7018
CategoryWireless Access Point
LanguageEnglish

Summary

Chapter 1 Introduction

1.1 Package Contents

Lists the items included with the Access Point, such as the device, power adapter, and manual.

1.2 Features

Details the key functionalities and capabilities of the wireless LAN access point.

1.3 Specifications

Provides technical specifications including standards, data rate, security, frequency band, and physical dimensions.

1.4 Physical Description

Describes the physical appearance of the access point, including front and back panels and their components.

Chapter 2 Wireless LAN Access Point Connection

Chapter 3 Wireless LAN Access Point Configuration

3.1 Getting Started

Guides users on initial setup for configuring the access point from wired or wireless stations.

3.2.1 Status and Information

Explains how to view general information, system status, and network configuration details of the access point.

3.2.2 Wireless Setting

Covers setting up wireless modes like AP, Station, Bridge, and Repeater, including ESSID and channel.

3.2.3 Advanced Setting

Details advanced parameters for technically skilled users, such as authentication, thresholds, and intervals.

3.2.4 Security

Describes wireless security options including WEP, WPA, and 802.1x authentication for network protection.

3.2.5 MAC Address Filtering

Explains how to enable and configure MAC address filtering to control access to the wireless network.

3.2.6 System Utility

Covers system management functions like setting IP addresses, login passwords, and configuring DHCP server.

3.2.7 Configuration Tool

Provides tools to save (backup), restore, or reset the access point's configuration settings to factory defaults.

3.2.8 Firmware Upgrade

Details the process for upgrading the access point's system firmware using a firmware file.

3.2.9 Reset

Explains how to perform a system reset on the access point to resolve issues or revert to default states.

Chapter 4 Troubleshooting

Related product manuals