To Next Page
C
Carl MeyerAug 5, 2025
What to do if Digitus Adapter can't find wireless access point?
- JJohn WilliamsAug 5, 2025
If your Digitus Adapter isn't detecting any wireless access points, try the following: 1. Click the ‘Rescan’ button multiple times to refresh the list. 2. Move closer to a known wireless access point to improve signal strength. 3. Ensure that ‘Ad hoc’ function is enabled on the wireless device for direct wireless connection. 4. Adjust the position of your network card or computer, then click ‘Rescan’ again.
General
