4
• Visually inspect the power cord to see that it is secured fully to the AC power
connector.
• Make sure that there is proper heat dissipation and adequate ventilation around
the switch.
• Do not place heavy objects on the switch.
Desktop Installation
When installing the switch on a desktop, the rubber feet included with the device
must be attached on the bottom at each corner of the device's base. Allow enough
ventilation space between the device and the objects around it.
Warning: Do not turn on the power switch before power cables are connected.
Power surge may cause damage to the Switch.
Power failure
As a precaution, the switch should be unplugged in case of power failure. When
power is resumed, plug the switch back in.
To Next Page
Loading...
Need help?
General
