7
Specification
This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be
required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the
Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Model DN-80221-3
Standard
IEEE 802.3、IEEE 802.3u、IEEE 802.3ab 、IEEE 802.3z、IEEE 802.3x、IEEE 802.1X、
IEEE 802.1q 、IEEE 802.1p、IEEE 802.1d 、IEEE 802.1w、IEEE 802.3ad
Interface
24*10/100/1000Mbps RJ45 Port
2*10/100/1000Mbps Combo ports
2* 100/1000Mbps SFP Slots
Network media
10BASE-T: UTP category 3,4,5 cable
（
）
100BASE-TX: UTP category 5, 5e cable（≤100m）
1000BASE-T: UTP category 5e, 5 cable（≤100m）
100BASE-FX:MMF,SMF
MAC Address Table 8K, Auto-learning, Auto-aging
jumbo frame 9216Bytes
Transfer Mode Store-and-forward
Packet Forward Speed 41.66Mpps
Switching Capacity 56Gbps
Dimensions(L*W*H) 440*208*44mm
Input Power Supply 100~240V AC， 50/60Hz
Operating Temperature 0°C ~ 40 °C
Storage Temperature -40 °C ~ 70 °C
Operating Humidity 10% ~ 90% non-condensing
Storage Humidity 5% ~ 90% non-condensing
Surge Protection Common mode ±6KV Differential mode ±4KV；
MTBF >50000 hour
，
To Previous Page
Loading...
Need help?
General
