Need help?Do you have a question about the Digitus DN-651154 and is the answer not in the manual?
Configures port speed, duplex mode, flow control, and frame size settings.
Configures PoE settings for individual ports, including power supply status and priority.
Sets the total PoE output power and monitors chip temperature and voltage.
Automatically disconnects PoE power when a port has no data transmission for a set period.
Configures Virtual LANs (VLANs), including port VLAN assignment and tagging.
Configures static or dynamic link aggregation for increased bandwidth and redundancy.
Configures Multiple Spanning Tree Protocol (MSTP) for loop prevention and network topology.
Configures DHCP snooping to prevent rogue DHCP servers and ensure IP address integrity.
Configures 802.1X network access control using RADIUS authentication.
Configures Access Control Lists (ACLs) for MAC and IP-based traffic filtering.
Updates the switch's firmware to the latest version for new features or fixes.
To Next Page
General
