4. PoE
4.1 PoE Port Configuration
You can view the working status of the port PoE and the current voltage and current
data provided, screen as blew:
In the link column of the page, indicates that the port has no data transmission,
indicates that the port is in forwarding state, in the power supply status
column indicates that the port is not PoE powered, and indicates that the port is
in PoE power supply state. The voltage, current, and power columns respectively
display the voltage, current and power provided by the POE power supply port. The
priority column is used to change the PoE power supply priority of the switch port.
When the overall power is insufficient, the port with higher priority will give priority
to power supply. The startup bar is used to enable the port PoE function.
4.2 Devices Power Supply
This page is used to set the total output power of the switch, with a value range of 60
~ 300W. It can also be used to view the total output power and chip temperature of
the current switch.
To Next Page
Loading...
