5.5 MSTP Configuration
Global configuration: select the spanning tree protocol version (STP / RSTP / MSTP is
optional), MSTP protocol is selected by default.
An example of configuring MSTP:
Set the mapping VLAN of multi spanning tree.
Configuration name: identifies the name of the VLAN to MSTI mapping, the bridge
must share the name and revision (see below), and the VLAN-to-MSTI mapping
configuration in order to share the MSTI spanning tree. (Within region) the name is
up to 32 characters.
Configuration version: revision of MSTI configuration above. It must be an integer
between 0 and 65535.
Mapped VLANs: a list of VLANs mapped to MSTI. VLANs must be separated by
commas and / or spaces. VLAN can only be mapped to one MSTI. An unused MSTI
should remain empty. (That is, no VLAN is mapped to it).
To Next Page
Loading...
