Need help?Do you have a question about the Digitus DN-651118 and is the answer not in the manual?
Details the Ethernet ports and LED indicators located on the front of the switch.
Explains the color and function of each LED indicator on the switch.
Describes the upper panel's 6-pin terminal block for DC power input and connection procedures.
Provides essential instructions to avoid damage and safety threats during installation.
Step-by-step guide on how to securely attach the switch to a DIN rail.
Procedures for safely detaching the switch from the DIN rail mount.
General| Installed SFP modules quantity | 0 |
|---|---|
| Gigabit Ethernet (copper) ports quantity | 5 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 4 |
| Stackable | - |
| Certification | CE |
| Product color | Black, Blue |
| Rack mounting | No |
| Number of fans | 0 fan(s) |
| Housing material | Metal |
| Country of origin | China |
| DIN rail mounting | Yes |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Cable types supported | Cat3, Cat4, Cat5 |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| MAC address table | 4096 entries |
| DC input voltage | 12 - 48 V |
| Power protection features | Over voltage, Short circuit |
| Operating temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Package depth | 135 mm |
| Package width | 162 mm |
| Package height | 53 mm |
| Package volume | 1159.11 cm³ |
| Package weight | 483.333 g |
| Switch type | Unmanaged |
| Switch layer | L2 |
| Mean time between failures (MTBF) | 300000 h |
| Ethernet interface type | Gigabit Ethernet |
| UK Trade Tariff code | 85176200 |
Weight and Dimensions| Depth | 86 mm |
|---|---|
| Width | 118 mm |
| Height | 39 mm |
| Weight | 360 g |
To Next Page
