Digitus DN-95341 User Manual (English)

To Next Page

8-Port PoE Gigabit rack mountable Switch

+ 1x SFP Uplink

Manual

DN-95341

Products Description:

The DIGITUS 8-Port Gigabit Rack mount Switch with eight Power over Ethernet ports

and one additional SFP Fiber Port, offers your network significant improvement in

terms of performance and efficiency. Thanks to PoE support, you only need a single

(network) cable for power and data transfer. This switch makes it much easier to

connect devices such as access points, network cameras, and IP telephones, and

requires far less cabling than alternatives. It also allows you to extend your network

in places where there are no power supply cables or sockets available. The switch

does not require any configuration and therefore guarantees quick and seamless

integration into the network. Moreover, the switch has a rack mountable design and

can be easily installed with many standard racks, which makes this device the perfect

solution for data center and local server rooms.

Need help?

Do you have a question about the Digitus DN-95341 and is the answer not in the manual?

Digitus DN-95341 Specifications

General

Switch type	Unmanaged
Ports	8
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Port Speed	10/100/1000 Mbps
MAC Address Table	4000 entries
Jumbo Frames support	Yes
Store-and-forward	Yes
Power supply included	Yes
Housing material	Metal
Product colour	Black
LED indicators	Yes
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	10 - 90%
Storage relative humidity (H-H)	5 - 95%
Packet Forwarding Rate	11.9 Mpps
Product Type	Switch
Switching Capacity	16 Gbps
Jumbo frames	9 KB
Certification	CE, FCC