Digitus DN-95345 User Manual

Outdoor 4-Port Fast Ethernet
PoE Switch + 1 Uplink Port
Quick Installation Guide
DN-95345
Introduction
The DIGITUS® outdoor PoE switch is a high quality PoE switch in a
weatherproof housing with the IP67 protection class.The housing is very
sturdy and conforms to the IK10 vandalism protection class. The PoE switch
offers a maximum range of up to 250 meters for PoE 802.3af devices and up
to 200 meters for PoE 802.3at devices with a transmission rate of 10Mbps.
When using the standard 100m range, the transmission rate is 100Mbps.
This outdoor switch serves as an all-in-one device that is ready for use
immediately after connecting it to the mains voltage. The device requires no
settings to be made thanks to plug and play. If you you’re your PoE devices
into a free PoE port, the switch will automatically detect power supply and
PoE mode. The all-in-one solution for outdoor PoE applications requires no
separate power supply and no external overvoltage protection.

Digitus DN-95345 Specifications

General

Brand	Digitus
Model	DN-95345
Category	Switch
Language	English

Summary

Introduction to the PoE Switch

Package Contents and Setup Guidance

Package Contents

Lists the items included in the product package.

Important Setup Notes

Provides crucial instructions for proper installation and operation.

Connection Overview

Details the physical connections and port types for the switch.

Advanced Features and Status Indicators

EX Mode Dip Switch Configuration

Explains how to configure the switch's extended PoE range and isolation modes.

EX ON Mode Configuration

Ports 1 & 2 up to 250m PoE distance. When enabled, each port is isolated, but is linked to the uplink ports.

EX OFF Mode Configuration

Normal communication for ports 1 ~ 5.

EX Mode for 802.3af (15.4W)

Camera connection up to 250m@10Mbps via EXPoE ports.

EX Mode for 802.3at (30W)

Camera connection up to 200m@10Mbps via EXPoE ports.

LED Status Definitions

Describes the meaning of various LED indicators on the switch.

Power LED Indicators

Power status indicators (Orange ON/Off).

Link/Act LED Indicators

Ethernet connection and data activity indicators (Green ON/Off/blinking).

PoE LED Indicators

PoE device connection status indicators (Orange ON/Off/blinking).

Physical Installation and Connectivity Guidelines

Installation Procedure

Instructions for mounting the PoE switch using screws and brackets.

Switch-to-Switch Connection and Grounding

Guidelines for connecting multiple switches and proper grounding for safety.