Digitus DS-12883 - Page 16

16
4.[ CAPS ] + [ CAPS ] mode
Hotkey combination
Description
[ CAPSLOCK ] [ CAPSLOCK
][ 1 ] OR [ 2]
Switch to the computer corresponding
to the port of [ 1 ] [ 2 ]
[ CAPSLOCK ] [ CAPSLOCK ][→] OR [ ↓ ]
Switch to the next computer
[ CAPSLOCK ] [ CAPSLOCK ][ ←] OR [↑]
Switch to the previous computer
[ CAPSLOCK ] [ CAPSLOCK ][ B ]
Buzzer on or off
[
CAPSLOCK ] [ CAPSLOCK ] [ S ]
Automatic switching mode, the default
is 5seconds, press [ ESC ] to exit
[
CAPSLOCK ] [ CAPSLOCK ] [ S ] [ N ]
Set the automatic switching mode
interval, press [ ESC ] to exit
[
CAPSLOCK ] [ CAPSLOCK ] [ SCROLL ]
Switch to [ SCROLL ] [ SCROLL ] hotkey
combination mode
[
CAPSLOCK ] [ CAPSLOCK ] [ NUM ]
Switch to [ NUM ] [ NUM ] hotkey
combination mode
[
CAPSLOCK ] [ CAPSLOCK ] [ CTRL ]
Switch to [ CTRL ] [ CTRL ] hotkey
combination mode
Note:
1. The detection time of each hotkey is 5 seconds. If you press [ CTRL ]
after 5 seconds after pressing [ CTRL ] for the first time , this key combination will be
invalid input.
2. In the combination key, [ N ] represents the number key [ 1 ] ---- [ 9 ], the number
of seconds in the time interval can be set, as shown in the following table:
Automatic switching interval
N
second
1
5
2
10
3
15
4
20
5
25
6
30
7
35
8
40
9
60