CONNECTION AND OPERATION:
1) Connect the HDMI input source into this product (Input cables are optional). *Please refer to
connection diagram section.
2) Insert the DC side of 5v power supply into this product and then connect the AC side of the
power supply into the wall outlet.
For this product, there are different operations for your choice
1) Press the button POWER on the product will present a status of standby or working.
2) Manual switching.
Pushing the button “Select A” can select one of four sources to display on the Output A device
circularly; Pushing the button “Select B” can select one of four sources to display on the Output
B device circularly.
3) Remote control
It can control the output A and B separately.
The button 1, 2, 3, 4 can select source devices freely.
NOTE: Extracted Audio only supports one source from Output A.
CONNECTION DIAGRAM:
4x2 HDMI Matrix Fast Switch
Speaker
To Next Page
Loading...
