12
9.1 TX upgrade process:
1) Firstly, please make sure TX and RX already paired
2) Unzip the upgrade package, and copy “tx_image, tx_config.txt” file on the
root of a Udisk/Memory stick (Fat32)
3) Connect the Udisk/Memory stick with RX USB port and then power on the
RX
4) After RX enter the main page, power on TX (no need to connect the HDMI
cable), then the TX will link with RX automatically
5) Then RX will send the upgrade file to TX for upgrade wirelessly, upgrade
message will show on the RX screen. During the upgrade process, the TX
Red and blue lights will flash alternately.
To Next Page
Loading...