6
Device management
The device can be managed:
1. Remotely via the mobile app
2. In manual mode using the control/reset button
Use an appropriately sized thin metal object (such as a pin or clip, etc.) to press the control/reset
button
Press the button quickly to turn on/o voice prompts.
Press and hold (more than 5 s) the button to reset the parameters to factory settings and switch the
device to the conguration/pairing mode.
Attention!
When the device is switched to the conguration mode, the device settings, including the wireless
network access settings, are reset to default values. To restore the device remote control you will
need to re-congure it via the application.
Attention!
On resetting, the device will stay linked to the account. To link the camera to another account you
must rst unregister from the current account.
To Next Page
Loading...