DIGMA DiVision 300 - Getting Started

7
4. GETTING STARTED
An initial setup must be performed in order to manage the device via the mobile app. To do this:
1. Connect your mobile device to a 2.4 GHz standard wireless network.
2. Download the DIGMA SmartLife app from the app store on your mobile device.
3. Launch the DIGMA SmartLife app. Register your account by following the tips on the screen (for
new users), or log in using your existing credentials.
4. Go to the My Devices section. Click the + icon in the upper right corner to add a new device and
select the device type to be connected (Smart camera).
5. Put the device in the conguration mode by pressing and holding the on/o button (you will
hear a conrmation sound, and then the voice messages “Reset to factory settings” and “Network
connection required”).
6. Follow the setup instructions on the mobile device screen:
• Make sure your mobile device is connected to a WiFi network and enter the access password
• Click the Conrm button and wait until the application detects a congurable device. Wait for the
progress indicator to reach 100%.
• Aer successful conguration you will hear the voice message “The network connection has been
established”.
• Assign a suitable name to the camera and complete the setup by pressing the Done button.