Digoo DG-TH11300 User Manual

1. In standard mode, press button to check “Current time Alarm 1 Alarm
2 Current time”.
2. When it’s Alarm 1 displaying mode, press and hold to enter alarm setting mode.
3. The setting sequence is: Hour→Minute→exit
4. Press and to change the setting;
Press and hold and to quickly increase or decrease the data.
5. Press button to turn on or off the alarm.
(When the alarm is on, the bell symbol will appear on the display.)
1. In standard mode, press button to check “Current time Alarm 1 Alarm
2 Current time”.
2. When it’s Alarm 2 displaying mode, press and hold SET/AL SET to enter alarm set-
ting mode.
3. The setting sequence is: Hour→Minute→exit
4. Press and to change the setting;
Press and hold and to quickly increase or decrease the data.
5.Press button to turn on or off the alarm.
(When the alarm is on, the bell symbol will appear on the display.)
Alarm ring:
1. Ringing will last for 2 minutes.
2. Alarm tone:
AL1: BIBIBIBI
AL2: BIBI
3. While the alarm is ringing, press “ ” button to get 5 minutes of snooze time,
the “Zz” will flash on the LCD. To cancel snooze, press on the back of the
main unit.
ALARM 1 SET
ALARM 2 SET
SNOOZE FUNCTION

Digoo DG-TH11300 Specifications

General

Brand	Digoo
Model	DG-TH11300
Category	Weather Station
Language	English