Need help?Do you have a question about the Dillon Super 1050 and is the answer not in the manual?
General| Type | Progressive Reloading Press |
|---|---|
| Stations | 8 |
| Priming System | Automatic |
| Lubrication | Required for smooth operation |
| Manufacturer | Dillon Precision |
| Model | Super 1050 |
| Caliber Compatibility | Multiple |
| Material | Steel |
| Case Feeder | Optional |
| Bullet Feeder | Optional |
| Operation | Manual |
Discusses essential safety practices for reloading ammunition and operating the machine.
Explains the function of each of the eight stations on the Super 1050 reloading machine.
Instructions for securely mounting the Dillon Super 1050 reloading machine onto a workbench.
Guidance on attaching the casefeed assembly to the Super 1050 machine.
Steps to install and position the powder measure on the Super 1050.
Instructions for mounting the spent primer cup and bullet bin.
How to operate the machine handle and check its functions before loading.
Details on how to select and fill the primer pick-up tube and magazine.
Steps to start the casefeeder motor and begin the reloading process.
How to readjust the micro-switch for different calibers in the casefeeder.
Instructions for adjusting the operating handle to different length settings.
Explains the purpose and adjustability of the swager for primer pockets.
Detailed steps for changing the primer system from large to small or vice versa.
Procedures for safely removing the toolhead from the machine.
Steps to remove the shellplate from the Super 1050 machine.
How to install and adjust the sizing/decapping die for proper operation.
Instructions for adjusting the expander die for case mouth flaring.
How to adjust the powder die for proper belling and powder dispensing.
Understanding how bullet seating depth affects cartridge length (OAL).
How to install and adjust the bullet seating die for correct cartridge length.
Instructions for installing and adjusting the crimp die for proper case crimping.
Specific swager adjustments for certain calibers and high-pressure loads.
Guidance on using RL1050 toolheads and dies with the Super 1050.
Addresses indexing problems and case insertion issues at Station 1.
Solutions for problems encountered during resizing and decapping.
Addresses issues with primer pocket swaging and the priming station.
Solutions for powder dispensing, bullet seating, and crimping problems.
Guidance on using Loctite and maintaining the swage mechanism.
Lubrication for casefeed plunger, roller, and related parts.
Lubrication for indexing lever, swage rod, and related parts.
Lubrication for primer punch base, rocker arm, and tappet.
Lubrication for the crank assembly, including bearings and pins.
Lubrication for the mainshaft, shellplate lock ring, and center hole.
Adjusting the casefeed window cuff for optimal case feeding.
Adjusting the case deflector block for pistol or rifle cartridges.
Covers problems like no rotation, cases feeding upside down, or jamming.
Addresses cases hanging at the micro-switch or jamming at the casefeed arm.
Exploded view and parts list for the toolhead assembly.
Exploded view and parts list for the handle assembly.
Exploded view and parts list for the swage rod assembly.
Components of the upper primer system assembly.
Components of the lower primer system assembly.
Exploded view and parts list for the casefeed frame assembly.
Exploded view and parts list for the casefeeder clutch assembly.
Exploded view and parts list for the powder measure assembly.
To Next Page