Page 29
@Home Collection
12.2 Sanitizing
To destroy bacteria and organic compounds in the hot tub water, a
sanitizer must be used regularly. Chlorine and bromine are the two most
popular sanitizers used to date. Many other additives are available for
your hot tub. Some are necessary to compensate for out-of-balance
water; some aid in cosmetic water treatment and others simply alter the
feel or smell of the water. When adding hot tub shock (chlorine or non-
chlorine) or pH balancing chemicals activate the jet pump(s) and leave
the hot tub cover open for a minimum of 20 minutes. By doing this you
will allow excessive chemical vapors to exit the hot tub, protecting pillows
and plastic knobs from chemical attack.
WARNING: RISK OF PERSONAL INJURY, DROWNING
OR ENTRAPMENT! Never leave your hot tub unattended for
any reason while the cover is open and accessible, especially
to small children and animals!
CAUTION: RISK OF PERSONAL INJURY OR HOT TUB
DAMAGE!
Never add chlorine tablets (trichlor) or acid to your
hot tub for any reason! These chemicals may damage com-
ponents within your hot tub, burn or irritate your skin, create a
rash and void the manufacturer warranty for your hot tub.
!
12.3 Other Additives
Many other additives are available for your hot tub. Some are necessary
to compensate for out-of-balance water, some aid in cosmetic water
treatment and others simply alter the feel or smell of the water. For
specicguidance,onmaintainingwaterquality,consultyourauthorized
dealer who can recommend the appropriate chemical products.
13.0 Troubleshooting
For help troubleshooting common occurrences, contact your local dealer.
Always insist on genuine Dimension One Spas replacement parts.
If you need further assistance, you can email our service department at:
USA: service@d1spas.com
International: Service-Europe@d1spas.com
Error Messages
1. Temperature over 112°F (44°C)
WARNING! DO NOT ENTER SPA! Your hot tub has
overheated. Open the cover and allow the water to cool below 110°F
(43°F). Once the water has cooled, reset your GFCI to restart your
spa.
Spa water may be very hot. Do not touch or enter the water and
contact your Authorized D1 dealer immediately for service.
To Next Page
Loading...
