Dimplex CXLSN - User Manual

Operating Instructions
IMPORTANT
These instructions should be read carefully and retained for future
reference. Note also the information given on the appliance.
Ultra-Slim Automatic Storage and Convector Heaters
IMPORTANT SAFETY INFORMATION
(85318 Iss. 8)
CXLSN
• The Installation must be carried out by trained personnel.
• A means for disconnection must be incorporated in the ! xed wiring by a double pole switch
with a contact separation of a minimum of 3mm and in accordance with the current IEE Wiring
Regulations.
• The heater must not be installed immediately below a ! xed socket outlet.
• The heater is not suitable for connection to a 30A ring circuit.
• Do not position the heater under windows where curtains can contact the heater casing.
• To maintain stability, it is essential that the heater is placed on a level surface and care should
be taken to avoid irregular surfaces, such as may result from carpets or tiled surrounds partially
protruding under the heater.
• Only heat resisting cable (minimum rating T85) should be used.
• If used in a bathroom the heater must be installed such that switches and other controls
cannot be touched by a person in the bath or shower.
• During any reassembly of the heater if a part of the thermal insulation shows damage or
deterioration which may impair safety, it should be replaced with an identical part.
• WARNING - In order to avoid overheating, do not cover the surfaces of the heater.
• Do not put clothes, fabrics or any other materials on the heaters.
• Do not place objects in contact with the heater.
• Do not position the heater where objects can come within 250mm (10”) of the top and 75mm
(3”) of the sides of the heater.
• CAUTION – Some parts of this product can become very hot and cause burns.
• Particular attention has to be given where children and vulnerable people are present.
• This appliance can be used by children from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, if they have
been given supervision or instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance.
• Children less than 8 years of age should be kept away unless continuously supervised.
• IMPORTANT - Due to the newness of materials the heater will produce a smell for the ! rst
few days of operation. Rooms must be well ventilated and young children, caged birds or
people with respiratory complaints must not remain in proximity to the heater for the ! rst 48
hours of the commissioning period.

Dimplex CXLSN Specifications

General

Brand	Dimplex
Model	CXLSN
Category	Heater
Language	English

Summary

Important Safety Information

General Safety Precautions

Covers installation requirements, electrical safety, positioning, and material usage for safe operation.

Overheating and Burn Warnings

Advises against covering the heater, placing objects near it, and warns about hot surfaces causing burns.

Appliance Usage by Vulnerable Persons

Details safe usage by children and persons with reduced capabilities, emphasizing supervision and hazard awareness.

Storage Heater Operation

Setting the Controls

Guidance on setting input and output controls for domestic and commercial use to achieve desired comfort levels.

Storage Heater Principle of Operation

Explains how heat storage bricks work and release heat via radiation and convection using damper control.

Input Control Explained

Details how the input control sets room temperature, adjusts charge based on feedback, and the influence of ambient conditions.

Output Control Explained

Describes the output control's function in releasing stored heat via a damper for manual or automatic operation.

Manual Output Operation

How to manually open the damper to release stored heat for a boost, returning to minimum for normal operation.

Automatic Output Operation

Setting the output control for automatic damper opening at a specific time, influenced by core temperature and weather.

Convector Heater Operation

Convector Heater Principle of Operation

Explains the convector's role in providing 'top-up' heat independently or with the storage heater.

Switching On the Convector

Instructions on how to activate the convector switch and indicates when it is operating.

Setting the Convector Thermostat

Guidance on adjusting the thermostat knob to achieve the desired room temperature.

Convector Control Panel Overview

Identifies and explains the functions of the thermostat scale, symbols, and ON/OFF switch.

24-hour Convector Operation

Details on enabling convector availability during off-peak periods and its impact on storage heater charging.

Maintenance and Support

Cleaning Instructions

Recommendations for cleaning the heater's external appearance using dry or damp cloths.

After Sales Service and Warranty

Information on the two-year guarantee, repair/exchange policy, and contact details for support.

Recycling Information

Guidance on responsible disposal of electrical products at the end of their life cycle.