What to do if my Dimplex DC10RC does not operate?
If your Dimplex Air Conditioner isn't working, first, ensure it's connected to a functioning power socket and switched on. If an 'E4' error code appears, the internal water container might be full, so empty it. Also, check if the start timer is active and, if so, deactivate it by pressing the power button.
Why is my Dimplex Air Conditioner not operating efficiently?
Several factors can affect the efficiency of your Dimplex Air Conditioner. Check if the unit is in direct sunlight and close the curtains. Make sure windows and doors are closed. Clean the filters if they are dirty, and ensure that air inlets or outlets are not blocked. Finally, the room temperature might be below the set temperature, in which case you should lower the set temperature.
How to fix a Dimplex DC10RC Air Conditioner remote control that is not working?
If your Dimplex Air Conditioner remote control isn't working, first, move closer to the air conditioner and aim the remote directly at the control panel. If that doesn't work, replace the batteries.
What to do if the compressor on my Dimplex Air Conditioner does not work?
If the compressor in your Dimplex Air Conditioner isn't working, it might be due to activated overheat protection. Wait 30 minutes for the temperature to decrease, and then turn the air conditioner on again. Note that the compressor starts 3 minutes after the unit is switched on.
General| Cooling Capacity | 2.9 kW |
|---|---|
| EER | 2.61 |
| Refrigerant | R410A |
| Operating Frequency | 50Hz |
| Power Supply | 220-240V |
| Timer | Yes |
| Functions | Cooling, Fan, Dehumidifier |
| Operating Voltage | 220-240V |
Read and retain the instruction manual for future reference regarding installation and usage.
Key safety guidelines covering vent blockage, operating environment, temperature limits, and power requirements.
Store and transport the unit upright, and wait 24 hours before initial operation if unsure.
List of items included in the product package.
Overview of the unit's components, including controls, inlets, outlets, and drain plugs.
Essential pre-operation checks including reading manual, voltage verification, and ensuring drain plugs are fitted.
Diagram illustrating the unit's control panel and its various buttons and display indicators.
Explanation of icons used on the control panel and remote for different operating modes and fan speeds.
Details on using the POWER button to switch the unit on/off and information on compressor delay protection.
How to select cooling, heating, or dehumidification modes, including drain plug requirements.
Instructions for increasing and decreasing the set temperature in cooling and heating modes.
Explanation of the display panel's functions, showing current settings and error codes.
How to select fan speeds (Low, Medium, High, Auto) and the logic behind Auto fan speed operation.
Guide to setting the timer for automatic unit activation after a specified delay.
Instructions for setting the timer to automatically turn the unit off after a specified period.
Details on the Sleep Comfort mode, which adjusts temperature gradually for better sleep.
Diagram and explanation of the remote control buttons for operating the air conditioner.
Instructions for unpacking the unit and correctly installing the exhaust tube.
Guidance on optimal placement of the unit, including clearance and exhaust pipe positioning.
Important placement considerations, including avoiding sharp bends, damp areas, and direct sunlight.
Illustrations demonstrating the correct installation procedure for the adjustable window slider kit.
Requirement to attach a drain hose when using heating or dehumidification functions.
Instructions on how to configure the unit for heating mode by repositioning the exhaust tube.
Note on exhaust tube positioning for heating versus cooling/dehumidification modes.
Procedure for manually draining the internal water container when error code E4 is displayed.
Instructions on how to remove and clean the air filters located at the rear of the unit.
Guidance on cleaning the exterior cabinet of the air conditioner.
General care tips including power connection, unplugging, placement, and filter maintenance.
Information about the unit's overheat protection feature and automatic shutdown.
Explanation of error codes E1, E2, and E4, detailing potential causes and recommended actions.
Steps to diagnose and resolve issues when the air conditioner fails to power on or operate.
Troubleshooting steps for addressing inefficient cooling or heating performance.
Solutions for common noise problems experienced with the air conditioner.
Guidance on troubleshooting if the compressor fails to engage or operate.
Steps to fix problems with the remote control not responding or functioning correctly.
Guidelines for the proper disposal of electrical appliances and environmental considerations.
Contact information and procedure for seeking maintenance or repair assistance for the unit.
Detailed technical specifications for the DC10RC, DC12RCBW, and DC15RCBW models.
Details on the 24-month warranty period and contact information for service advice and support.
Contact addresses and phone numbers for Dimplex Australia and New Zealand service centres.
To Next Page
