REMOTE CONTROL
The remote control can be used to operate all functions.
1. Remove the battery cover at the back of remote control (Picture
2).
2. Insert the battery (included) [Picture 3].
3. Replace the battery cover.
Operation
1. Connect the unit to a power supply and switch on.
2. The unit will be in standby mode and sound a ‘beep beep’ once
connected to the power supply. The ON/OFF indicator light will
illuminate.
3. Press the ON/OFF button to turn the unit ON.
4. The unit defaults to: Low Power, no swing and a temperature setting
of 25°C.
5. Press the LOW / HIGH POWER button to change from Low Power to
High Power.
6. Press the ECO button to put the unit into ECO Mode.
7. Press the TIMER button once, to set a time for the unit to turn off
automatically. The number will flash on the LED display when the
To Next Page
Loading...
