Dimplex GDDEM10 User Manual

4
CONTROL PADS ON THE DEHUMIDIFIER
The control panel of the dehumidifier you purchased may look like the one below:
Control panel(1)
Indicator lights Control pads
1
Bucket full indicator light
2
Auto defrost indicator light
3
Mode Pad
Press to select the operation mode: continuous
dehumidification 40% humidity level
50% humidity level 60% humidity level
continuous dehumidification
POWER Pad
Press to turn the dehumidifier on and off.
4
When auto defrost is operation on, the
indicator light illuminates.
The indicator light flashes at 0.5Hz
under refrigerant leakage detection.
The indicator light flashes at 5Hz
under room temperature sensor error.
The indicator light flashes at 5Hz
under evaporator temperature sensor
error.
NOTE: If the auto defrosts indicator light
flashes, unplug the unit and plug it back in.
If error repeats, call for service.
Continuous operation on indicator light
40% humidity level mode operation on indicator light
5
50% humidity level mode operation on indicator light
6
60% humidity level mode operation on indicator light
1
2
3
4
5
6
7
8
7
8

Dimplex GDDEM10 Specifications

General

Brand	Dimplex
Model	GDDEM10
Category	Dehumidifier
Language	English