Other features
IDENTIFICATION OF PARTS
Bucket Full Light
Glows when the bucket is ready to be
emptied, or when the bucket is removed
or not replaced in the proper position.
Auto Shut Off
The water level control switch shuts off the
dehumidifier when the bucket is full, or when
the bucket is removed or not replaced in the
proper position. When the set humidity
is reached, the unit will shut off automatically.
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot be
restarted
in the first 3 minutes. This is to protect
the unit. Operation will automatically start after
3 minutes.
Auto Defrost
When frost builds up on the evaporator coils, the
compressor will cycle off and the fan will continue to
run until the frost disappears.
Auto-Restart
If the unit breaks off unexpectedly due to a power cut, it will restart
with the previous function setting automatically when the power
resumes.
Identification of parts
1
Control panel
2
Air intake grille
3
Water bucket
4
Air filter (behind the air intake grille)
5
Handle
6
Air Outlet grille
7
Power cord band (Used only when storing the unit.)
8
Drain hose outlet (see page 7)
9
Power Cord
10
Power Plug
NOTE: All the pictures in the manual are for
explanation purposes only. Your unit may be
slightly different. The actual shape shall prevail.
The operations and functions are the same.
To Next Page
Loading...
Need help?
General
