HUMIDITY SETTING
Setting humidity from 30%~90%,
while 60%RH is recommended.
Power control
On/Off
FAN SPEED
High/Low
TIMERS
Timer setting 1~12
hours.
Lcd display
BUCKET FULL INDICATOR
Water tank is full, when lit
STOP
%RH
Setting humidity 30%~90%
Room temperature
Display timer setting of auto switch on / off
The indicator is on when the defrost
function isin operation.
Bucket full indicator the machine will stop running.
Low fan speed
High fan speed
Heating mode
LCD display :
FUNCTION EXPLANATION
DESCRIPTION OF COMPONENTS
AIR FILTER
CONTROL PANEL
WATER
STORAGE
CONTAINER
AIR INLET
OUTLET FOR
DEHUMIDIFIED
DRYAIR
CASTORS
CONTINUOUS
DRAINAGE OUTLET
In heating mode, the air flow is selectable
(Note:Heating is activated only when the
ambient temperature is below 25 degree C.)
*Heating mode only available on EP Models*
HEATING
(available on EP Models only)
To Next Page
Loading...
Need help?
General
