Dimplex HTC621W - Page 3

3
This product is for use with high voltage system (120V~240V) with a minimum load
of 300W; it is not designed for use with low voltage (24V) central heating & air condi-
tioning systems or wall mounted furnaces.
Inordertoavoidre,shockordeath,shutoffpowersupplyatthecircuitbreakeror
fuse and test that the power is off before wiring.
This product must be installed in accordance with the Canadian Electrical Code, and
intheprovinceofQuebec,byaqualiedelectrician.Dimplexassumesnorespon-
sibility for damages caused by improper wiring. Improper installation automatically
voids the warranty.
• Verify that the heating appliance that is being connected is within the speci-
edloadrange.
• Conrmvoltageiswithinthedevicerating.
• For wiring, use copper conductors only.
• Mustbemountedonacertiedelectricalbox.
Keep this manual in a safe place for future reference.
Contact us at:  www.dimplex.com/customer_support
For Troubleshooting and Technical Support
OR  Toll-Free 1-888-DIMPLEX (1-888-346-7539)
Monday to Friday 8:00 a.m. to 4:30 p.m. EST
Please have your model number and product serial number ready.