Need help?Do you have a question about the Dimplex PLX200E and is the answer not in the manual?
Covers essential precautions for using electrical appliances, avoiding water proximity, and proper placement to prevent hazards.
Outlines age-specific usage rules, supervision requirements, and restrictions for children interacting with the appliance.
Details essential earthing rules, wire colour coding, and necessary disconnection methods for safe electrical installation.
Warns against using dropped or damaged units, specifies placement, clearances, and fire risk reduction measures.
Presents technical data according to Ecodesign, including heat output, consumption, control types, and dimensions.
Covers upright operation, IP rating, voltage checks, and the crucial use of the provided wall bracket.
Provides detailed instructions for securely attaching the heater to the wall bracket, including clearances.
Explains the initial setup process for time, date, daylight savings, and sound preferences.
Identifies the main components: display screen, touch-sensitive buttons, and heating status indicator.
Explains the adjustable thermostat range and provides notes on potential operating noise and troubleshooting.
Details the main screen layout, mode display, and the sleep function for energy saving.
Explains the role of each button (Menu, Back, Enter, Up/Down, Advance) in navigating the interface.
Explains timer efficiency, structure (4 periods/day), and the 'Heating On'/'Heating Off' status.
Details how Adaptive Start predicts and pre-heats the room to reach target temperature by the scheduled start time.
Explains the purpose of error codes and lists specific fault codes with their descriptions for diagnosis.
Covers essential precautions for using electrical appliances, avoiding water proximity, and proper placement to prevent hazards.
Outlines age-specific usage rules, supervision requirements, and restrictions for children interacting with the appliance.
Details essential earthing rules, wire colour coding, and necessary disconnection methods for safe electrical installation.
Warns against using dropped or damaged units, specifies placement, clearances, and fire risk reduction measures.
Presents technical data according to Ecodesign, including heat output, consumption, control types, and dimensions.
Covers upright operation, IP rating, voltage checks, and the crucial use of the provided wall bracket.
Provides detailed instructions for securely attaching the heater to the wall bracket, including clearances.
Explains the initial setup process for time, date, daylight savings, and sound preferences.
Identifies the main components: display screen, touch-sensitive buttons, and heating status indicator.
Explains the adjustable thermostat range and provides notes on potential operating noise and troubleshooting.
Details the main screen layout, mode display, and the sleep function for energy saving.
Explains the role of each button (Menu, Back, Enter, Up/Down, Advance) in navigating the interface.
Explains timer efficiency, structure (4 periods/day), and the 'Heating On'/'Heating Off' status.
Details how Adaptive Start predicts and pre-heats the room to reach target temperature by the scheduled start time.
Explains the purpose of error codes and lists specific fault codes with their descriptions for diagnosis.
General| Model | PLX200E |
|---|---|
| Type | Panel Heater |
| Power Output | 2000W |
| Control Type | Electronic |
| Thermostat | Yes |
| Frost Protection | Yes |
| Mounting | Wall Mounted |
| Safety Features | Overheat Protection |
| Color | White |
To Next Page
