Need help?Do you have a question about the Dimplex QM050RF and is the answer not in the manual?
Specifies minimum distances required from the front (300mm) and sides (150mm) of the heater.
Identification of the display screen, Menu, Back, Advance, Enter buttons, and selector dial.
Understanding the home screen and using the dial for adjustment and menu access.
How timers are structured (4 periods/day) and temporary target temperature changes.
Using predictive heating to ensure target temperatures are met at the start of heating periods.
Steps to navigate to and select timer modes via the menu.
Instructions on how to activate the Frost Protect mode via the menu.
Options for setting Boost Temperature and Boost Time duration.
Enabling detection of open windows to switch the heater off.
Using predictive heating to ensure target temperatures are met at the start of heating periods.
Codes for thermistor faults, overheat, serial comms, heating element, and wireless module errors.
Codes for open window, low water, heat output disabled, time loss, and hub connection errors.
To Next Page
General
