Need help?Do you have a question about the Dimplex QM100RF and is the answer not in the manual?
General| Power Output | 1000 W |
|---|---|
| Frequency | 50 Hz |
| Frost Protection | Yes |
| Voltage | 230-240V |
| Control Type | Remote Control |
| Safety Features | Overheat Protection |
Mandatory instructions and warnings for electrical connection.
Information on mains cable fitting and electrical connection safety.
Precautions and guidelines for the safe use of the appliance around children.
Critical warnings regarding earthing, hazardous voltage, and live parts.
Initial checks, warnings, and model-specific dimensions.
Specifications for screws and recommendations for different wall types.
Critical warnings about secure mounting, weight, and moving the heater.
Identifying positions for wall mounting screws.
Drilling, fitting wall fixings, and tightening screws.
Important warnings about screw tightening and moving the heater with cells.
Details on connecting Peak and Off-Peak circuits.
Specifics on connecting Live, Neutral, and Earth wires.
Required torque for terminal block connections.
Important notes for standalone installations and tariff reliance.
Rewiring for single supply connections.
Route for mains cable and connection point.
Specifications for approved mains cable types and sizes.
Caution regarding damaged supply cords and replacement.
Ensuring secure connections to prevent ignition risk.
Removing inner front and insulation for access.
Precautions for handling cells and fitting them into the heater core.
Fitting the remaining rows of energy cells, including upside-down placement.
Refitting the inner front panel and casing for reassembly.
Ensuring connections are secure, cable is managed, and final fixings are tight.
Verifying casing condition and power availability.
Programming charge times based on the user's tariff.
Ensuring the heater is isolated from the electricity supply before battery replacement.
To Next Page
