EasyManuals Logo

Dimplex QM150 Installation Manual

Dimplex QM150
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
- 6 -
To avoid a fi re hazard the cardboard insert within the heater core must
be removed before the heater is switched on. Also ensure all polystyrene
packaging is removed before the heater is operated. Leaving combustible
packaging in the appliance could lead to fi re and cause severe personal
injury, death and damage to property.
WARNING
The appliance is very heavy (up to 50kg) and care should be taken when
handling during installation to reduce risk of muscular or skeletal injuries.
CAUTION
The appliance should not be repeatedly switched on/o by an external
room thermostat as this could lead to failures of the electronic controller
and may invalidate the guarantee – further clarifi cation SHOULD BE
SOUGHT FROM https://www.dimplex.co.uk/support.
CAUTION
During the fi rst 48 hours of operation rooms must be well ventilated as
the heater will produce a smell. Young children, caged birds, or persons
with respiratory complaints must not remain in close proximity to the
appliance during the fi rst 48 hours or operation.
CAUTION
i
It is important that the appliance bricks are dry and free from mould
growth. Wet or mouldy bricks can lead to an unpleasant odour and or
steam being generated by the appliance which could upset the customer
and damage the appliance

Other manuals for Dimplex QM150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dimplex QM150 and is the answer not in the manual?

Dimplex QM150 Specifications

General IconGeneral
ColorWhite
ControlManual
Heat Output1.5 kW
InstallationFreestanding
Heating TechnologyQuartz
Adjustable ThermostatYes
Overheat ProtectionYes
Tip-Over SwitchYes
TypeQuartz Heater
Power Input1.5kW
Weight4.5kg
Voltage230 V

Related product manuals