- 11 -
Settings
To navigate to the Settings Menu, from the Home Screen:
Press the Menu button to access the Main Menu. Rotate the Dial to
highlight ‘Settings’, then press the Dial. Each of the following headings
relate to an item in the Settings Menu.
Main Menu
Boost
Modes
Settings
Settings
Heater Lock
Boost
Setback
Date / Time
Sound
Comms Adaptive
Heater Lock - see page 34.
Boost Settings
Default Boost Target Temperature
This is the default Boost Target Temperature that is used when ‘Boost Mode’ is activated.
Max Boost Duration
This is the maximum length of time that the user is able to activate ‘Boost’ for. Shown in minutes (when under
an hour) or hours (if over an hour) in the following increments: 30 mins, 1 hour, 2 hours, 3 hours, 4 hours.
The value chosen will be the max allowed when boost is activated. This is required for the Boost Duration Lock
to function.
Setback Settings
Setback is a function that only modifi es Timer Mode operation. When Setback is enabled it overrides any ‘Heating O ’
period to maintain a constant temperature.
This can be used to prevent the room temperature from falling below a minimum value while there is no demand for
heat (‘Heating O ’).
The value of this temperature is restricted to a value between 8 and 19 °C. This is because Setback should not be treated
as a regular ‘Heating On’ period.
Date & Time Settings
This allows the Time, Date and Daylight Savings Time settings to be modifi ed.
Sound Settings
Audio feedback when the user presses a button can be enabled or disabled here.
‘Comms’ (Communications) Settings
This allows Wireless Connectivity features to be enabled or disabled. Entering this menu item will display a list of
available communications methods to that heater.
To Next Page
Loading...
Need help?
General
