Operation
F
Sleep
Timer
Press multiple times to change the 'SLEEP TIMER,' in 0.5 hour increments from 0.5
hours to 8 hours before turning off. The remaining time displays. (The icon is Green
in colour).
G
-
Volume
Down
Press multiple times to control the volume level of the speaker down to mute. When
bluetooth is not connected, the speaker will play sound of a fire, this can be turned
OFF by pressing this button until the sound is muted.
G
-
Volume
Up
Controls the level of the speaker up. The volume buttons can also control the volume
of your paired bluetooth device.
H
-
Blue-
tooth
When a device is paired to the product, pressing this button will disconnect the
paired device.
I
-
LED
Colour
Press multiple times to change the colour of the LED mood lighting and the coloured
fuel bed. The colour can be set as Orange, Red, Green, Blue or cycling through all
four colours continuously.
User Modes:
Mode Name /Description Action (Actions cannot be input by remote control)
Change Celsius (
0
C) to Fahrenheit (
0
F)
Press both Temp down (
) and Temp up ( ) on
the unit and hold until beep is heard and display
flashes. (To revert back to Celsius repeat this action)
Disable/Enable Heat Options
Hold both Flame cycle (
) and Heat cycle ( ),
on the product, for 5 seconds, when the heater has
been disabled the product will beep. This will disable
heat control functions on the product only. To enable
heat repeat this action. Note: the remote control will
still be able to operate heat functions.
13