UN02-0176LG
a
b
c
e
f
g
h d
1.2.1
- 1.1 -
1.1 - Manufacturer's identification data
DINAMIC OIL S.p.a.
Via Togliatti, 15
41030 Bomporto (Mo) - Italy
telefono 059/812611 - telefax: 059/812606
e-mail: dinamicoil@dinamicoil.it
- Plate details
a = Model
b = Serial nr.
c = Max. delivery
d = Max. pull
e = Code
f = Year
g = Max. speed
h = Hoisting pressure
Information
Under no circumstances must the data shown on the
identification plate be altered.
1.3 - Using this instruction manual
This manual contains the necessary information
enabling the operator to familiarize and correctly use
the winch (also simply described as “the machine”).
The information contained is intended for skilled op-
erators (1).
The original instructions are supplied by the manu-
facturer in English.
To fulfil legal or commercial requirements, the origi-
nal instructions may be supplied by the manufacturer
in other languages.
If there are any doubts, whatsoever, concerning the
correct interpretation of the instructions contained in
this manual, immediately contact the manufacturer
for any necessary clarifications.
To facilitate the consultation of the manual, it has
been divided into chapters of major concepts.
For quick searches please consult the index.
Reproduction or publication, in part or in whole, of
the information contained in this manual is prohib-
ited without written authorisation given by the manu-
facturer.
Using this instruction manual, for purposes other
than those described, without written authorisation
given by the Manufacturer, is prohibited.
Any violation will be prosecuted according to the
law.
1.4 - Exclusion of responsibility
The manufacturer is released from any responsibility
for damages deriving from:
- incorrect installation or which is not in accordance
with applicable laws;
- use of the machine by unauthorised and/or un-
trained personnel;
(1) Only experienced people having the proper technical ability
and knowledge of regulations and laws will be able to carry
out the necessary operations and to identify and avoid pos-
sible damages during handling, installation, operation and
maintenance of the machine.
General informations
1
1.2 - Winch identification data
To Next Page
Loading...