浙 江 鼎 力 机 械 股 份 有 限 公 司
Zhejiang Dingli Machinery Co.,Ltd
邮箱/Mailbox：service@cndingli.com网址/Website：www.cndingli.com
24/48
3、电气控制说明(Electric Control instruction)
3.1 开机画面(Boot screen)
首先打开系统的电池开关，再打开下控箱的钥匙开关，左边位置为平台控制，右边位置为
下车控制，显示器上电 9-30Vdc，进入初始画面，画面显示鼎力 LOGO,下表画面切换频率
为 1S。(First, turn on the battery switch of the system.power, then switch the key on the
ground controlling box. The left position means platform controlling and the right position
means ground controlling. It enters into the boot screen when the display powered on 9-
30Vdc., and display the LOGO of “DingLi”. The frequency of the switch picture is 1s)
3.2 主界面(Main interface)
初始画面经过 3 秒后，进入套筒车的监测画面；(After three seconds in startup screen, it
will turn into the monitor screen of the 12Mt Vertical Mast)
To Next Page
Loading...
